Toshiba Tl000LE User Manual page 30

PROCEDURE 3
Connector Check
The packed HDD is connected to the system board by the HDD connector. Disassemble the
system unit and check the HDD. Detailed procedures are described in Part 4. If this cable
is disconnected, connect it to the system board and perform PROCEDURES I and 2. If the
problem still exists, perform Check 1.
Check I
Check 2
2-24
The HDD may be damaged. Replace the HDD unit with a new one. If the error
still occurs, perform Check 2.
The system board may be damaged. Replace the system board with a new one.