Formax 6600 Series Operator's Manual page 4

FlexFeed™; see 1
The FlexFeed™ is the feeding part of the
system. There are two types of feeders
available. The automatic and the special feeder.
The automatic feeder does not require any
adjustments for the separation. The FlexFeed™
is equipped with double sheet control. In this
way the system can detect faulty sets of
documents. The FlexFeed™ is equipped with
feeder swap. This means that two feeders can
be linked as pairs. When the first feeder is
empty, the system switches to the other feeder.
Meanwhile the other empty feeder can be
refilled without stopping. It's also possible to
feed multiple documents from one feeder. In this
way more documents can be fed from one
station, for example an original and a copy of a
document.
The upper automatic feeder of a feeder module
can be equipped with a "daily mail" function for
processing documents or sets of documents
which cannot be processed automatically (e.g.
stapled).
6
Collating area; see 2
After feeding, the documents are gathered in the
collating area.
IntelliDeck™; see 3
When the system is equipped with the
IntelliDeck™ incorrect sets of documents will be
thrown out automatically by the IntelliDeck™. In
this way the system does not need to stop.
Correct sets will be transported to the
PowerFold™ unit.
PowerFold™; see 4
The PowerFold™ part folds the documents. The
following fold types are possible:
• no fold.
• single fold.
• letter fold.
• zig-zag fold.
• double parallel fold.
1-800-658-8788
www.abcoffice.com