Clearing Stoppages - Formax 6600 Series Operator's Manual

• technical errors.
If an error occurs the display shows a screen
with an error description and a suggested
solution.
When a paperflow error occurs the following
functions are available:
• show more information.
• reset the error after solving the problem (the
error screen will disappear).
The black arrow or a black feeder indicates
where the problem occurs.
When a reading or double feed control error
occurs, the document stops in the collator area.
The operator must remove the document(s) from
the collator area and must complete the set
manually!
When there is a technical problem the display
shows a message. The error cannot be solved
by operating personnel and assistance of the
service support is needed.
First write down the error code, then switch the
inserter off and on again, to verify system operation.
When the error still occurs contact your service
organization.
10.2

Clearing stoppages

For clearing stoppages the four sections of the
system can be opened (A, B, C and D) (see
figure below).
A B C
Lower envelope track
When a stoppage occurs in the lower envelope
track, remove the envelopes as follows (see
figure below):
• open the side cover A.
• pull the blue handle B down and remove the
envelope(s) from the lower envelope track.
• close the side cover.
A
Reset the error after solving the problem with
key 6.
If needed, envelopes and documents can be
transported manually to the insert table or lower
envelope track by means of handle D (see
figure above). To transport a inserted document
manually turn handle C.
PowerFold™
When a stoppage occurs in the PowerFold™,
remove the documents from the PowerFold™
as follows (refer to "Operating controls"):
• push the lower end of the locking handle to
open the PowerFold™ cover.
• remove the documents from the
PowerFold™.
• close the PowerFold™ cover.
Reset the error after solving the problem with
key 6.
FlexFeed™
When a stoppage occurs in the FlexFeed™,
D
remove the documents from the FlexFeed™ as
follows (refer to "Operating controls"):
• pull the hand grip upward to open the vertical
transport cover.
1-800-658-8788
www.abcoffice.com
B C D
41