Formax 6600 Series Operator's Manual page 45

error description
Reading stop.
Reading error.
Reading error.
Reading error.
Reading error.
Reading error.
Reading error.
Reading error.
Too many sheets.
Incomplete set.
Service assistance is needed for the error codes with the message "technical failure". First write down
the error code, than switch the inserter off and on again, to verify system operation. When the error still
occurs contact your service organization.
suggested solution
Remove the documents,
check the matched number
and replace the set in the
feeder or complete the set
manually.
Remove the documents.
Check the set and the used
OMR code. Replace the set in
the feeder or complete the set
manually.
Remove the documents,
check the matched number
and replace the set in the
feeder or complete the set
manually.
Remove the documents and
check the used OMR code.
Adjust the reading head.
Remove the documents and
check the used OMR code
(flex-dongle).
Remove the documents and
check the used OMR code
(mark line distance).
Remove the documents and
check the used OMR code
(flex-dongle).
Remove the documents.
Check the set and complete
the set manually.
Remove the documents.
Check the set and complete
the set manually.
Remove the documents.
Check the set and complete
the set manually.
information
Unmatched set
Sequence error.
Wrong set sequence.
Wrong parity in code.
Undefined mark found
Wrong mark distance.
Wrong numbers of marks 3 : 129
Wrong window position.
Set size exceeded.
Part of previous set.
1-800-658-8788
www.abcoffice.com
Error code
3 : 123
3 : 124
3 : 125
3 : 126
3 : 127
3 : 128
3 : 132
3 : 134
3 : 135
47