Formax 6600 Series Operator's Manual page 20

Folder/inserters
Table of Contents

Advertisement

Letter fold
When letter fold is selected the following
choices are available (see figure below):
• go to the double parallel folding menu.
• increase the position of the first fold to the
right.
• decrease the position of the first fold to the
left.
• increase the position of the second fold to the
right.
• decrease the position of the second fold to
the left.
• confirm the settings by pressing "OK" which
will get you back to the "job settings" menu.
The fold length of the first fold can be minimally
75 mm (2.95 inch) and maximally the length of
the longest document used minus 50 mm (2.0
inch). The fold length of the second fold can be
minimally the length of the first fold plus 25 mm
(1.0 inch) and maximally the length of the
longest document used minus 25 mm (1.0 inch).
Double parallel fold
When double parallel fold is selected the
following choices are available (see figure
below):
• go to the "zig-zag" fold menu.
• increase the position of the first fold to the
right.
• decrease the position of the first fold to the
left.
• increase the position of the second fold to the
right.
• decrease the position of the second fold to
the left.
• confirm the settings by pressing "OK" which
will get you back to the "job settings" menu.
22
The fold length of the first fold can be minimally
75 mm (2.95 inch) and maximally the length of
the longest document used minus 50 mm (2.0
inch). The fold length of the second fold can be
minimally the length of the first fold plus 25 mm
(1.0 inch) and maximally the length of the
longest document used minus 25 mm (1.0 inch).
Zig-zag fold
When zig-zag fold is selected the following
choices are available (see figure below):
• go to the "no fold" menu.
• increase the position of the first fold to the
right.
• decrease the position of the first fold to the
left.
• increase the position of the second fold to the
right.
• decrease the position of the second fold to
the left.
• confirm the settings by pressing "OK" which
will get you back to the "job settings" menu.
The fold length of the first fold can be minimally
75 mm (2.95 inch) and maximally the length of
the longest document used minus 50 mm (2.0
inch). The fold length of the second fold can be
minimally the length of the first fold plus 25 mm
(1.0 inch) and maximally the length of the
longest document used minus 25 mm (1.0 inch).
1-800-658-8788
www.abcoffice.com

Advertisement

Table of Contents
loading

Table of Contents