Table of Contents
Advertisement
All job settings are described in the chapter "Job
settings".
5.4
Copy job menu
After pressing key 4 in the "job menu" the "Copy
job" menu is shown. The "copy job" menu
shows the following functions (see figure
below):
• Job information (
).
• choose a higher job number to copy from.
• choose a lower job number to copy from.
• choose a higher job number to copy to.
• choose a lower job number to copy to.
• copy the job with "OK" (key 6) which will get
you to the "job menu".
A job can only be copied to a free job.
If all jobs are programmed the display shows
"No more free jobs".
It is possible to copy an AutoSet™ job into a
job. Before an AutoSet™ job can be copied
AutoSet™ has to be defined successfully.
5.5
Delete job menu
After pressing key 5 in the "job menu" the
"Delete job" menu is shown. The "Delete job"
menu shows the following functions (see figure
below):
• Job information (
).
• select a higher job number to delete.
• select a lower job number to delete.
• delete job with "OK" which will get you to the
"job menu".
18
6.
JOB SETTINGS
After confirmation with "OK" in the "create job"
or "edit job" menu, the display shows the "job
settings" menu.
To program a job use the following order of
settings (see figure below):
1. Envelope settings menu (
2. Document settings menu (
3. Fold settings menu (
)
4. OMR settings menu (
5. Double Sheet Control (DFC) and thickness
detection settings menu (
6. Exit select menu ( )
Use key 1 or 2 to select a menu and key 3 to
edit the selection. Use key 4 to go to the test set
menu. Use key 5 to go to the job menu. Use key
6 to save a job.
6.1
Envelope settings menu
When the "envelope settings" menu is selected
the following choices are available:
1. Envelope with closed flap ( ) sealed or not
sealed.
2. Envelope with open flap (
sealed.
3. No envelopes (
).
1-800-658-8788
www.abcoffice.com
)
)
)
)
) sealed or not
Advertisement
Table of Contents
