Formax 6600 Series Operator's Manual page 22

Exit settings overview
On the machine Exit 1 is the Stacker and Exit 2 is the Side exit.
Sorting Symbol
Swap
When a stack of envelopes is removed from the full stacker, about ten envelopes will leave from the
side exit before the inserted envelopes are stacked at the stacker again.
Batching
The batch counter can be set from 1 to 250 in steps of one inserted envelop per exit. Default the batch
counter is set to 50.
DFC
OMR
Off
24
Exit
1 Inserted envelopes are stacked until the stacker is full.
2 Inserted envelopes leave from the side exit when the
stacker is full.
1 Alternate batches of inserted envelopes are stacked or
leave from the side exit depending on the preset
2
counter.
1 Inserted envelopes with thickness equal to or greater
than the reference value are stacked.
2 Inserted envelopes with thickness smaller than the
reference value leave from the side exit.
1 Inserted envelopes with thickness smaller than the
reference value are stacked.
2 Inserted envelopes with thickness equal to or greater
than the reference value leave from the side exit.
1 Inserted envelopes with thickness equal to or smaller
than the reference value are stacked.
2 Inserted envelopes with thickness greater than the
reference value leave from the side exit.
1 Inserted envelopes with thickness greater than the
reference value are stacked.
2 Inserted envelopes with thickness equal to or smaller
than the reference value leave from the side exit.
1 Inserted envelopes are stacked according to the OMR
code.
2 Inserted envelopes leave from the side exit according to
the OMR code.
1 All envelopes are stacked.
2 -
1 -
2 All envelopes leave from the side exit.
1-800-658-8788
www.abcoffice.com