Table of Contents
Advertisement
4.5.6
Clearing Stoppages
When a document is blocked in the separation unit
the document can be removed as follows:
1.
Open the release handle for the separation unit
(D).
2.
Remove the documents.
If necessary release the feed unit:
1.
Place your hand on the push down area F.
2.
Push down the release handle E.
3.
Open the feeder.
The documents can be removed from the
transportation area and from the rear side of the
separation rollers.
4.
Close the feed unit:
a
Place your hand on the push down area F.
b
Push the feed unit down until it locks into
place.
5.
Place release handle D of the separation unit in
the closed position.
6.
Press
at the inserter to reset the error
and restart the job.
4.5.7
Support for Curved Reply
Envelopes (option)
Depending on the quality of the paper, the conditions
during storage, etc. envelopes can be curved. This
can cause smaller reply envelopes to skew while
being processed by the Thin Booklet Feeder.
A special support is available to allow curved
envelopes to be correctly processed. It can be used
for envelopes with a height up to 110 mm (4.33").
A
B
D
C
E
F
67
Advertisement
Table of Contents
