enable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
disable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
show vlan
Purpose
Syntax
Description
Parameters
To enable GVRP on the Switch.
enable gvrp
The enable gvrp command, along with the disable gvrp command
below, is used to enable and disable GVRP on the Switch, without
changing the GVRP configuration on the ports and the LAGs.
None.
Only administrator or operator-level users can issue this command.
DGS3100# enable gvrp
Success.
DGS3100#
To disable GVRP on the Switch.
disable gvrp
The disable gvrp command, along with the enable gvrp command
above, is used to enable and disable GVRP on the Switch, without
changing the GVRP configuration on the ports and the LAGs.
None.
Only administrator or operator-level users can issue this command.
DGS3100# disable gvrp
Success.
DGS3100#
To display the current VLAN configuration on the Switch
show vlan {<vlan_name 32>}
The show vlan command displays summary information about each
VLAN including the VLAN ID, VLAN name, the Tagging/Untagging
status, and the Member/Non-member/Forbidden status of each port
that is a member of the VLAN.
<vlan_name 32> − The name of the VLAN whose settings are to be
displayed.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
104