D-Link DGS-3100 SERIES Cli Manual page 204

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure LLDP mac_phy_configuration status:
DGS3100# config lldp ports 1 dot3_tlvs mac_phy_configuration_status
enable
Success.
DGS3100#
195
To define LLDP management basic TLVs advertisement on a port or ports.
config lldp ports ports [<portlist>|all] dot3_tlvs
mac_phy_configuration_status [enable | disable]
The config lldp dot3 TLVs command defines if lldp will advertise the
mac_phy_configuration_status the command is per port on the switch.
ports – ports.
dot3_tlvs mac_phy_configuration_status – defines if the advertisement is
enabled or disabled
Only Administrator or operator-level users can issue this command.