Config Dhcp_Auto Enable; Show Dhcp_Auto - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Restrictions
Example usage:

config dhcp_auto enable

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To automatically update the switch's firmware and configuration files:

show dhcp_auto

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
53
startup − Indicates the Startup Configuration file is to be uploaded.
running − Indicates the Running Configuration file is to be uploaded.
None.
DGS3100# upload configuration 1.1.1.23 1\running—config
01–Jan–2000 01:26:11 %COPY–I–FILECPY: Files Copy – source
URL running–config destination URL tftp://1.1.1.23/1\running–
config
... ..01–Jan–2000 01:26:16 %COPY–W–TRAP: The copy operation
was completed success fully
!
158 bytes copied in 00:00:05 [hh:mm:ss]
DGS3100#
To automatically update the switch's firmware and configuration files
via the web, using options 66 and 67 of the DHCP packets.
config dhcp_auto [enable | disable]
The config dhcp_auto enable command enables/disables Auto
update feature.
−
Enables the Auto-Update feature.
enable
−
Disables the Auto-Update feature.
disable
None.
DGS3100# config dhcp_auto enable
The configuration will take place on the next time the device will
get DHCP address.
Success
DGS3100#
To display the current state of the auto update feature.
show dhcp_auto
The show dhcp_auto command displays the current state of the
auto update feature.
None.
None.