Menu Structure - Kaco blueplanet 87.0 TL3 Manual

Manual
Fig. 64: Device and hardware information interface
Area
Device
Software
Network
Tab. 7: Description of the areas
9.4

Menu structure

NOTE
Protection of special grid parameters
1. As soon as the password has been activated, this also applies to external change requests (e.g. via MOD-
BUS or other external interfaces).
2. You will be asked to enter the password if you would like to change a protected grid parameter. Once you
have entered the password, protection will be disabled for all protected grid parameters (including the
password protection setting) for 15 minutes. Protection is reactivated automatically after this time has
elapsed.
3. If you attempt to disable a protected parameter group, you will have to enter the password first unless it
was entered earlier in the session.
4. As soon as a set of configuration parameters has been exported, the password is part of this configuration.
5. If the configuration has been imported into another device, then the other device will have the same pro-
tection status. If the other device already had protection and the password for the new configuration is dif-
ferent, then the new configuration will be rejected.
NOTE
We recommend using an up-to-date Firefox or Chrome browser or the default browser that is available on the
mobile terminal devices to configure the device via the web interface.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 105 TL3 KACO
blueplanet 110 TL3 KACO blueplanet 125 TL3 KACO blueplanet 137 TL3 KACO blue-
planet 150 TL3 KACO blueplanet 155 TL3 KACO blueplanet 165 TL3
Configuration and operation | 9
Description
Displays the serial number, device name, grid type, local in-
stallation location and time
Displays the firmware package installed
Displays the current grid parameters
x) x)
by means of a password ( not network parameters!)
Page 51