Menu Structure - Kaco blueplanet 50.0 TL3 M1 WM OD IIGS Manual

Manual
NOTE
Depending on the tolerances of the measuring elements, the measured and displayed values are not always
the actual values. However, the measuring elements ensure maximum solar yield. Due to these tolerances, the
daily yields shown on the display/Monitor may deviate from the values on the grid operator's feed-in meter by
up to 15%.
NOTE
Calculating efficiency by measuring the current and voltage values can lead to misleading results due to the tol-
erances of the measurement devices. The purpose of these measured values is to monitor the basic operation
of the system.
9.4

Menu structure

Display on the LCD
4
3
Fig. 46: Main menu
1 Selected menu option
2 Name of the active menu level
NOTE
The menu options displayed on screen are dependent on the country and network settings, and may vary ac-
cording to the type of device. Functions restricted to one or more countries are labelled with country codes in
accordance with ISO 3166-1.
Symbols used
Menu level (0,1,2,3)
1 2 3 4 4
Display
Option menu
9.4.1 Menu
Country- Men Display/
spec. Set- u Setting
tings level
Desktop
1 2 4 4
3
Measurements
1
2 3 4 4
Generator
1 2 3 4 4
Grid
1 2 3 4 4
Kaco blueplanet 50.0TL3 Kaco blueplanet 60.0TL3
Configuration and operation | 9
1
2
3 Menu options in the active menu level
4 Menu options of the next lower menu level
Password-protected menu (password can be re-
quested from KACO customer service)
Submenu
Option box
Setting range
Action in this menu/meaning
F Press Right arrow button.
F Open Menu: Press the right arrow button or the OK button.
Displays the DC-side voltage, amperage and power.
Displays the AC-side voltage, amperage and power.
Page 41