Pentek 6230 Operating Manual page 110

GC4016 MULTI-STANDARD QUAD DDC CHIP
Revision Date
0.1 February 24, 2000
0.2 April 10, 2000
0.3 April 20, 2000
0.4 August 8, 2000
1.0 August 27, 2001
© GRAYCHIP,INC.
This document contains information which may be changed at any time without notice
REVISION HISTORY
Original
Rewritten to reflect 2.5volt core, 3.3volt I/O power requirements,
Removed all references to TQ100 thin quad flat package,
All references to GC4017 are changed to GC4016,
Added Vcore and Vpin descriptions throughout,
Updated power consumption equations,
Simplified AC timing specifications,
Corrected Resampler Filter Specs,
Corrected typos, and miscellaneous errors.
Corrected Table 10: GC4016 Pin Out Locations, B14 and C14 VCORE and
VPAD swapped, other VPAD and GND pins added.
Minor Editing throughout
Page 12, Table 2, corrected +90 and -90 values
Added TAG_22 descriptions throughout
Added four separate frame strobe mode descriptions
Added resampler and ratio sync descriptions
Added one shot mode descriptions
Added parallel output timing diagram
Revised initialization procedures
Minor editing throughout
Electrical and Timing Specifications in Section 6 updated to match production
test
References to LVDS levels changed to differential inputs.
Diagnostics, GC4016 Configuration Generator, IS95 and UMTS examples
added
- i -
DATA SHEET REV 1.0
Description
August 27, 2001