Smarttech SMART Board 8055i User Manual page 61

C H A P T E R 7
Maintaining your interactive flat panel
W A R N I N G
Do not move the interactive flat panel by connecting a rope or wire to the handles
o
on the back. The interactive flat panel can fall and cause personal injury and
product damage.
3. There are two lifting handles on the back of the interactive flat panel, one on each side.
With one person at each end, use one hand each on the handle to support the weight of the
interactive flat panel and the other hand on the upper side to balance it during lifting. The
interactive flat panel weighs about 44.5kb (98 lb) .
4. Lift your interactive flat panel from its mounting location.
C A U T I O N
Do not allow the weight of the interactive flat panel to rest on the colour select
o
module because it is not designed to support product weight.
Do not leave the interactive flat panel face up, face down or upside down for an
o
extended period of time as it could cause permanent damage to the screen.
Do not place the interactive flat panel on a sloping or unstable trolley, stand or
o
table, because the interactive flat panel could fall, resulting in injury or severe
product damage.
55