Connecting Computers To Your Interactive Flat Panel; Interactive Flat Panel Touch Control And Video Input Connections - Smarttech SMART Board 8055i User Manual

C H A P T E R 3
Connecting computers and peripheral devices
Connecting computers to your interactive flat
panel
You can connect up to three computers simultaneously to your interactive flat panel:
Computer 1 (an installed room computer) connected to USB 1 and VGA 1
l
Computer 2 (a guest computer) connected to USB 2 and VGA 2
l
A guest laptop connected to USB 3 and HDMI 2 connector
l
N O T E
This document describes the default USB and video connections.To customise the USB and
video mapping, see Configuring the video and touch input for your SMART Board 8055i
interactive flat panel (smarttech.com/kb/170190).

Interactive flat panel touch control and video input connections

The following table shows which touch control USB connection corresponds with which video
input for each computer connection.
Computer 1
Computer 2
Guest laptop
16
Touch control
USB 1 (inside terminal
panel)
USB 2 (inside terminal
panel)
USB 3 (side terminal
panel)
Video input
Installation steps
VGA 1 page 17
VGA 2 page 18
HDMI 2 page 43