Using The Infrared Remote Control; Installing Batteries In The Remote Control - Smarttech SMART Board 8055i User Manual

C H A P T E R 5
Using your interactive flat panel

Using the infrared remote control

The infrared remote control enables you to turn on and turn off your interactive flat panel, change
the input source, change the volume and more. You can also use the remote control to open the
on-screen menu and then change the interactive flat panel's settings.
If the remote control doesn't respond, see Resolving remote control issues on page 65.
C A U T I O N
Do not subject the remote control to strong shock.
l
Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.
l
Do not expose the remote control to heat or steam.
l
Do not open any part of the remote control other than the battery compartment and
l
picture-in-picture compartment.
I M P O R T A N T
The remote control system does not function when strong light strikes the remote control
sensor or when there is an object between the remote control and its sensor.

Installing batteries in the remote control

Your remote control requires two 1.5V AA batteries.
W A R N I N G
To reduce the risk associated with leaking batteries:
use only AA type batteries
l
do not mix used and new batteries
l
orientate the battery's plus (+) and minus (-) terminals according to the markings found
l
on the remote control
do not leave the batteries in the remote control for an extended period
l
do not heat, disassemble, short or recharge the batteries, or expose them to fire or high
l
temperature
avoid eye and skin contact if batteries have leaked
l
dispose of dead batteries and product components in accordance with applicable
l
regulations
26