Important information for your
interactive flat panel
W A R N I N G
Failure to follow the installation instructions sent with your SMART product could result
l
in personal injury and product damage which may not be covered by your warranty.
Do not open or disassemble the SMART product. You risk electrical shock from the high
l
voltage inside the casing. Opening the casing also voids your warranty.
Do not stand (or allow children to stand) on a chair to touch the surface of your SMART
l
product. Rather, mount the product at the appropriate height.
To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
l
moisture.
If your SMART product requires replacement parts, make sure that the service
l
technician uses replacement parts specified by SMART Technologies or parts with the
same characteristics as the original.
Ensure that any cables extending across the floor to your SMART product are properly
l
bundled and marked to avoid a trip hazard.
Do not insert objects inside the cabinet ventilation holes, because they could touch
l
dangerous voltage points and cause electric shock, fire or product damage which may
not be covered by your warranty.
Do not place any heavy objects on the power cable. Damage to the cable could cause
l
shock, fire or product damage which may not be covered by your warranty.
Use only extension cords and sockets into which this product's polarised plug can be
l
fully inserted.
Use the power cable provided with this product. If a power cable is not supplied with this
l
product, please contact your supplier. Use only power cables that match the AC voltage
of the power outlet and that comply with your country's safety standards.
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
l
fragments with care when disposing of them.
Do not move or mount the interactive flat panel by connecting rope or wire to its handles.
l
Because the interactive flat panel is heavy, rope, wire or handle failure could lead to
personal injury.
Use only VESA®-approved mounting hardware.
l
i
Need help?
Do you have a question about the SMART Board 8055i and is the answer not in the manual?
Questions and answers