Smarttech SMART Board 8055i User Manual page 51

C H A P T E R 6
Using guest laptops with your interactive flat panel
g
To use a SMART GoWire cable
1. Connect a video cable from your interactive flat panel to your laptop.
2. Connect the USB cable from the USB port on your interactive flat panel to your laptop.
3. Change the video input to your laptop's video connection using the remote control or the
front control panel.
4. Disconnect the USB cable from your laptop and then connect it to the SMART GoWire
cable's USB A port.
I M P O R T A N T
If the SMART GoWire cable is not connected to your interactive flat panel through a USB
cable, you have access to SMART Meeting Pro software on your laptop for five minutes,
and then the software closes.
5. Connect the SMART GoWire cable's USB connector to your laptop.
The AutoPlay dialogue box appears.
6. Select Start SMART Meeting Pro.
SMART Meeting Pro software starts. You have touch control of your laptop on your
interactive flat panel and can use SMART Meeting Pro software while your laptop is
connected to your interactive flat panel.
g
To disconnect a SMART GoWire cable
1. If required, save your SMART Meeting Pro software file to your laptop. You can save the
file as a .ppt, .pdf or .notebook file.
I M P O R T A N T
You can open a .notebook file on a computer that has SMART Meeting Pro software or
SMART Notebook software installed or that is connected to a SMART product through a
SMART GoWire cable only.
2. Press the SMART Meeting Pro icon
3. Disconnect the SMART GoWire cable from your laptop and the USB cable.
45
in the notification area and then select Exit.