Using The Usb Port - Smarttech SMART Board 8055i User Manual

C H A P T E R 5
Using your interactive flat panel

Using the USB port

You can connect a USB drive or device to the USB A port on the side terminal panel on your
interactive flat panel, and then access it from computer 1 connected to VGA 1 and USB 1.
N O T E
To disable the USB A port on the side terminal panel, see Disabling the USB port on the side
terminal panel on page 19.
g
To use the USB port
1. Press the VGA 1 button on the remote control.
Press the Input button
2. Connect a USB device to the USB port.
3. Use computer 1 to access the content on your USB device.
42
on the front control panel until the input source is VGA 1.