Infrared Remote Control Buttons - Smarttech SMART Board 8055i User Manual

C H A P T E R 5
Using your interactive flat panel

Infrared remote control buttons

The remote control enables you to access on-screen menus and
change display and input settings.
Use the remote control's POWER ON button to turn your interactive
flat panel on and the STANDBY button to turn it off.
Use the remote control's input buttons to change input sources when
switching between the connected computers.
Number Function
POWER ON
1
STANDBY
2 ASPECT
STILL
3
4 Number pad
5 DISPLAY
6 SET
87 Left/Right
8 AUTO SET UP
9 VOL +/-
10 AUDIO INPUT
11 Input buttons
28
Description
Turns your interactive flat panel on
Turns your interactive flat panel off
Selects picture aspect
Turns the still picture mode on or off
Press buttons on the number pad to set and change
passwords, change channels or to customise or change
settings
Turns the on-screen display menu on and off
Makes selection
Increases or decreases the adjustment level within the
on - screen display menu
Enters auto setup menu
Increases or decreases audio output level
Selects audio input source
Selects input signal for the interactive flat panel