Wan Traffic Control - 4IPNET HSG326 User Manual

select the connection type applicable to you. For example, if your ISP is Cable
modem issuing Dynamic address, then you would select Dynamic connection.
Static: Manually specifying the IP address of the WAN Port. The fields with red
asterisks are required to be filled in.
Dynamic: It is only applicable for a network environment where the DHCP server is
available on the upstream network. Click the Renew button to get an IP address
automatically.
PPPoE: If your ISP provides PPPoE Dialup connection, then the ISP will issue you
an account with a password. You would need to enter the account credential in the
WAN configuration page for dialing up to the ISP.
NOTE
1. When in doubt, please consult your ISP provider regarding details of your
subscribed uplink service.

3.2.2. WAN Traffic Control

The Uplink and Downlink bandwidth configured here is the bandwidth for WAN
interface. However, please note that the actual bandwidth is still bounded by the
network speed of your ISP operator. For instance, when the network speed of your
ISP is limited to 1Gbps, the total throughput under such constraint will not be
greater than 1Gbps even if you configure 2Gbps on the Controller.
HSG326 Wireless Hotspot Gateway
17
User's Manual
ENGLISH