Uplink (Wan) Configuration; Wan Settings - 4IPNET HSG326 User Manual

Layer 2 Network Design Guidelines
Always connect hierarchically. If there are multiple switches in a building, use an

aggregation switch.
Locate the aggregation switch close to the network core (e.g. mainframe

housing)
Locate edge switches close to users (e.g. one per floor)


3.1. Uplink (WAN) Configuration

3.2.1 WAN Settings

Configuration Path:
The WAN port supports three connection configurations Static, Dynamic and
PPPoE. These connection types are adequate enough to support most ISP. The
Physical Mode drop-down list allows administrators to choose the speed and
duplex of the WAN connection. When Auto-Negotiation is On, the System chooses
the highest performance transmission mode (speed/duplex/flow control) that both
the system and the device connected to the interface support.
Depending on ISP's interfacing device the WAN port is connecting, you need to
Main Menu >> System >> WAN
HSG326 Wireless Hotspot Gateway
16
User's Manual
ENGLISH