Customizing Pos Tickets - 4IPNET HSG326 User Manual

Terminal Auto Setup (TAS – Only available on SDS200W)
TAS refers to an automatic connection mechanism that requires NO previous
network settings. Just press the TAS button on SDS200W for three seconds, and
it will automatically look for and associate to a suitable 4ipnet gateway that
supports this function.
The TAS connection will rewrite previous manual settings. You will see the Uplink
page of the WMI grayed out and the Status page will show that the system is in
TAS mode. The TAS process takes about thirty seconds to complete. Whether the
connection attempt succeeds or fails, the SDS200W will always have the printer
print out if the connection is 'successful' or it 'failed.' Please make sure beforehand
that the Ethernet cable is plugged in
The SDS100 can be set up the same way but it does not support
wireless connections.
Wired TAS uses port 5000 as the default value. The controller has to
 Note: set the port to the right number, as well. Additionally, when trying to
deploy TAS, make sure that the table of Terminal Server
Configuration on the controller side is not filled up. Otherwise, the
connection will fail.
.

10.4 Customizing POS Tickets

Configuration path:
For deployment flexibility on your hotspot, customization of POS tickets using
templates is supported on the HSG Wireless Hotspot Gateway. Up to 5 ticket
templates can be saved on the system.
Main Menu >> Users >> Internal Authentication >> On-
Demand >> POS Tickets
HSG326 Wireless Hotspot Gateway
112
User's Manual
ENGLISH