Montesa COTA 4RT RACE REPLICA Owner's Manual page 93

1
(1) CYLINDER HEAD BOLTS
(2) CYLINDER SEALING BOLT
Tighten the cylinder sealing bolt and cylinder head
mounting bolts securely.
1
1
2
(1) HANGER BOLT
(2) RADIATOR HOSE
Install the upper engine hanger bolt, tighten the nut to the
specified torque.
Torque: 24 N•m (2.4 kgf•m, 17 lbf•ft)
Connect the radiator hose to the water joint, tighten the
clamp screw securely.
Install the following:
– Camshaft
– Cylinder head cover
– Throttle body/insulator
– Exhaust pipe
Pour recommended coolant mixture and bleed air.
2
Engine servicing
2
(1) "T" MARK
(2) INDEX MARK
Camshaft/Cylinder Head Cover Installation
Camshaft Installation
Turn the crankshaft by operating the kickstarter, align the
"T" mark on the flywheel with the index mark on the left
crankcase cover.
1
4-35 4-35