Montesa COTA 4RT RACE REPLICA Owner's Manual page 79

1
(1) BOLTS
(2) CAM CHAIN GUIDE PLATE
(1) BOLT
(2) CAM CHAIN TENSIONER
Remove the following:
– Cylinder head (page 4-20)
– Left crankcase cover (page 4-46)
– Flywheel (page 4-49)
Remove the bolts and cam chain guide plate.
Remove the bolt, cam chain tensioner, pivot collar and
washer.
2
2
(1) CAM CHAIN TENSIONER
(2) CAM CHAIN GUIDE
Inspection
2 Inspect the cam chain tensioner and cam chain guide for
excessive wear or damage, replace if necessary.
1
1
3
1
(1) WASHER (2) PIVOT COLLAR
(3) CAM CHAIN TENSIONER
(4) PIVOT BOLT (5) APPLY LOCKING AGENT
(1) CAM CHAIN TENSIONER
(2) PIVOT BOLT
Installation
Apply a locking agent to the cam chain tensioner pivot
bolt threads.
Install the washer, cam chain tensioner, pivot collar and
pivot bolt.
Tighten the pivot bolt to the specified torque.
Torque: 12 N•m (1.2 kgf•m, 9 lbf•ft)
Engine servicing
2
5
4
1
2
4-21 4-21