Montesa COTA 4RT RACE REPLICA Owner's Manual page 108

Engine servicing
1
(1) FLYWHEEL PULLER
(2) FLYWHEEL
1
(1) WOODRUFF KEY
Remove the flywheel using the special tool.
Tool:
Flywheel puller 89010–NN4–003
Remove the woodruff key.
Installation
Install the woodruff key onto the crankshaft groove.
4-50 4-50
2
(1) WASHER
(2) FLYWHEEL NUT
(3) APPLY OIL
Install the flywheel onto the crankshaft.
Apply oil to the flywheel nut threads and seating surface.
Install the washer and flywheel nut.
1
3
2
Hold the flywheel with flywheel holder, tighten the
flywheel nut to the specified torque.
Tool:
Flywheel holder 89020–NN4–003
Torque: 167 N•m (17.0 kgf•m, 123 lbf•ft)
Install the left crankcase cover (page 4-48).