Montesa COTA 4RT RACE REPLICA Owner's Manual page 127

Pour half the required amount of recommended fork fluid
in the fork leg.
Specified fork fluid:
ED / 3E: Tech OJ 01
2E / 4E: Showa SS05
Pump the fork tube slowly 8-10 times.
Pour additional fluid to the specified capacity.
ED / 3E ED / 3E
Oil level
100 mm (3.9 in)
410 cc
Oil capacity (13.9 US oz)
(14.4 Imp oz)
ED / 3E ED / 3E
1
2
4
(1) FORK SPRING
(2) SPRING SEAT
(3) DISTANCE COLLAR
(4) O-RING
(5) FORK BOLT
Install the fork spring, spring seat and distance collar.
Apply recommended fork fluid to the new O-ring, then
screw the fork bolt into the fork tube.
2E / 4E 2E / 4E
87 mm (3.9 in)
405 cc
(13.7 US oz)
(14.3 Imp oz)
2E / 4E 2E / 4E
1
3 3
6
5
5
2
4
Frame servicing
ED / 3E ED / 3E 2E / 4E 2E / 4E
2 2
1 1
FORWARD FORWARD
(1) FORK TUBE
(2) TOP BRIDGE
Installation
Install the fork leg.
Raise the fork through the bottom bridge and top bridge.
Tech (ED/3E)
Place the fork tubes in the top clamp level as shown in
the picture.
Showa (2E/4E)
Place the fork tubes in the top clamp. The fork tubes
should be in the first slot related top clamp.
5-11 5-11