Montesa COTA 4RT RACE REPLICA Owner's Manual page 122

Frame servicing
4 3 2 1
(1) FORK TUBE BUSHING
(2) GUIDE BUSHING
(3) BACK-UP RING
(4) OIL SEAL
Right Fork Assembly
Clean the parts thoroughly with non-flammable or high
flush point solvent before assembly.
Install the following:
– Fork tube bushing
– Guide bushing
– Back-up ring
– New oil seal
Coat the guide and fork tube bushings with recommended
fork fluid.
Install the fork tube assembly into the fork slider.
5-6 5-6
1
(1) FORK SEAL DRIVER
ED / 3E ED / 3E 2E / 4E 2E / 4E
5 5
4 4
3 3
2 2
1 1
(1) GUIDE BUSHING
(2) BUCK-UP RING
(3) OIL SEAL
(4) STOP RING
(5) DUST SEAL
Drive the guide bushing, back-up ring and oil seal until the
stop ring groove is visible, using the special tool.
Tool:
Fork seal driver 07947–4630100
Install the stop ring into the fork slider groove securely.
Install the dust seal.
3 2
(1) FORK DAMPER ASSEMBLY
(2) CENTERING PLATE
(3) FORK TUBE
Install the centering plate and fork damper assembly into
the fork tube.
1