Montesa COTA 4RT RACE REPLICA Owner's Manual page 149

(1) BOOT
(2) SNAP RING
(3) PISTON ASSEMBLY
(4) SPRING
Disassembly/Assembly
NOTICE
 Keep the master cylinder piston, cups, spring and
snap ring as a set; don't substitute individual parts.
 When installing the cups, do not allow the lips to turn
inside out and be certain the snap ring is fi rmly sea-
ting in the groove.
Remove the snap ring and disassemble the master
cylinder.
2 3
1
Inspection
Check the following items (specifications; page 2-4):
– Master cylinder and piston for scoring, scratches or
other damage
– Master piston O.D. and master cylinder I.D.
Installation
Installation is in the reverse order of removal.
Torque:
Clutch hose oil bolt:
Master cylinder holder bolt: 3.2 N•m (0.33 kgf•m, 2.4 lbf•ft)
4
12 N•m (1.2 kgf•m, 8.8 lbf•ft)
Frame servicing
5-33 5-33