Montesa COTA 4RT RACE REPLICA Owner's Manual page 118

Frame servicing
ED / 3E ED / 3E
2
2E / 4E 2E / 4E 2E / 4E 2E / 4E
1
2
(1) SIDE COLLAR (2E/4E)
(2) AXLE
Installation
Clean the surfaces where the axle and axle clamps
contact each other.
Place the front wheel between the fork legs.
Apply thin layer of grease to the axle surface.
Apply grease to the axle threads.
Install the axle from the right side through the wheel and
left side collar.
Tighten the axle to the specified torque.
Torque: 69 N•m (7.0 kgf•m, 51 lbf•ft)
5-2 5-2
ED / 3E ED / 3E
1
2
2E / 4E 2E / 4E
1
2
(1) BRAKE CALIPER
(2) DISC COVER
(3) BOLTS
Install the brake caliper, flange collars and disc cover.
Apply a locking agent to the threads and tighten the
mounting bolts to the specified torque.
Torque: 26 N•m (2.7 kgf•m, 20 lbf•ft)
With the front brake applied, pump the fork up and down
several times to seat the axle and check the front brake
operation.
ED / 3E ED / 3E
3
3
2E / 4E 2E / 4E
3
3
(1) AXLE PINCH BOLT
While keeping the fork parallel, tighten the axle pinch bolt
to the specified torque.
Torque: 21 N•m (2.1 kgf•m, 17 lbf•ft)
1
1