Montesa COTA 4RT RACE REPLICA Owner's Manual page 63

1
(1) FUEL PRESSURE GAUGE
Start the engine.
Read the fuel pressure at idle speed.
Idle Speed: 1,800 ± 100 min-1 (rpm)
Standard: 260 kPa (2.65 kgf/cm2, 38 psi)
If the fuel pressure is higher than specified, inspect the
following:
– Pinched or clogged fuel return hose
– Pressure regulator
– Fuel pump (page 4–6)
If the fuel pressure is lower than specified, inspect the
following:
– Fuel line leaking
– Clogged fuel filter
– Pressure regulator
– Fuel pump (page 4–6)
2
1
1
(1) NEW SEALING WASHERS
(2) BANJO BOLT
After inspection, remove the banjo bolt and reinstall and
tighten the fuel feed hose banjo bolt using a new sealing
washer.
Always replace the sealing washer with new ones when
the fuel feed hose banjo bolt is removed or loosened.
Torque: 20 - 24 N•m (2 - 2.4 kgf•m, 15 - 18 lbf•ft)
Engine servicing
2
1
(1) VACUUM HOSE
(2) PRESSURE REGULATOR
Connect the pressure regulator vacuum hose.
4-5 4-5