Montesa COTA 4RT RACE REPLICA Owner's Manual page 152

Electrical servicing
1
(1) 3P (NATURAL) CONNECTOR
(2) 2P (NATURAL) CONNECTOR
ED / 2E
1
(1) FAN MOTOR RELAY (Only for ED/2E version)
Regulator/Rectifier Removal/installation
Remove the throttle body (page 4-10).
Disconnect the alternator 3P (Natural) connector and
ignition pulse generator 2P (Natural) connector.
Remove the fan motor relay from the bracket.
6-2 6-2
2
2
1
(1) 2P (BLACK) CONNECTOR
(2) 6P (BLACK) CONNECTOR
(1) BOLT
(2) BRAKE RESERVOIR
Disconnect the condenser 2P (Black) and regulator/
rectifier 6P (Black) connectors.
Remove the rear brake reservoir tank mounting bolt.
(1) BOLTS
(2) ELECTRIC STAY ASSEMBLY
2
2
1
(1) 2P (BLACK) CONNECTOR
(2) CONDENSER
Remove the electric stay mounting bolts, then remove the
stay assembly from the frame.
Release the condenser 2P (Black) connector, then remove
the condenser from the electric stay.
1
2
1