Montesa COTA 4RT RACE REPLICA Owner's Manual page 129

3
(1) STEM
(2) LOWER BEARING
(3) DUST SEAL
(1) BALL RACE REMOVER
Remove the lower bearing and dust seal from the steering
stem.
Remove the upper and lower bearing races from the
steering head using the special tools.
Tool:
Ball race remover 07948-4630100
1
2
1
(1) STEM
(2) DUST SEAL
(3) BEARING
(4) STEERING STEM DRIVER
Install new dust seal onto the steering stem.
Install the new lower bearing into the steering stem using
a hydraulic press and driver.
Tool:
Steering stem driver
1
4
3
2
07946-4300000
Frame servicing
(1) DRIVER
(2) ATTACHMENT
3
2
(1) STEM
(2) UPPER BEARING
(3) DUST SEAL
Install new bearing races.
Tools:
Driver 07749-0010000
Attachment, 42 x 47 mm 07746-0010300
Pack the upper and lower bearings with grease.
Install the steering stem, upper bearing and dust seal.
1
2
1
5-13 5-13