Montesa COTA 4RT RACE REPLICA Owner's Manual page 65

2
1
3
(1) BREATHER HOSE
(2) BOLT
(3) FUEL TANK
1 2
(1) VACUUM HOSE
(2) PRESSURE REGULATOR
Disconnect the fuel tank breather hose.
Remove the fuel tank mounting bolts.
Disconnect the vacuum hose from the pressure regulator.
1
(1) 2P (BLACK) CONNECTOR
Pull up the fuel tank and disconnect the fuel pump 2P
(Black) connector.
Remove the fuel tank and injector as an assembly being
careful not to damage the injector especially tip of the
injector.
After removing the fuel tank/injector assembly, protect tip
of the injector.
Also cover the cylinder head injector hole to prevent dust
and dirt fall into the combustion chamber.
Engine servicing
3
1
2
(1) BANJO BOLT
(2) FUEL FEED HOSE
(3) FUEL RETURN HOSE
(1) BOLTS
(2) FUEL PUMP
Remove the banjo bolt, sealing washers and fuel feed
hose.
Remove the fuel pump base mounting bolts.
Remove the fuel pump assembly being careful not to
damage the pump.
1
2
4-7 4-7