Table of Contents
Advertisement
Paper curls.
Cause 1
Remedy
Cause 2
Remedy
NOTE
When the printed side curls outward, set CURL ADJUSTMENT (See p. 6-55) in
SP.PRINT MODE in the USER MAIN. options in the SETUP menu to ON, and then print
again.
Nothing is printed on the paper.
Cause 1
Remedy
Cause 2
8
Remedy 1 If <Ennn-nnnn> is displayed in the display, turn the power OFF, wait for 10
Remedy 2 If the message does not disappear even after applying the Remedy 1, contact
Print Quality Problems
Nothing is printed on the paper, but the paper is filled with a certain color.
Cause 1
Remedy
Cause 2
Remedy 1 If <Ennn-nnnn> is displayed in the display, turn the power OFF, wait for 10
8-56
When You Cannot Obtain Appropriate Printout Results
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 4-2)
Paper is inappropriate.
Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 4-2)
Multiple sheets of paper were fed at a time.
Align the paper stack in the paper cassette or multi-purpose tray properly and
load it again. If you are using transparencies, coated paper, or labels, fan them
thoroughly and load them again. (See "Printing from the Paper Cassette," on p.
4-17, "Printing from the Multi-purpose Tray," on p. 4-35)
A problem has occurred inside the printer.
seconds or longer, and then turn the power ON again. This may clear the
message.
your local authorized Canon dealer for servicing.
The drum in any of the toner cartridges has deteriorated.
Replace the toner cartridge with a new one. (See "Replacing Toner Cartridges,"
on p. 7-2)
A problem has occurred inside the printer.
seconds or longer, and then turn the power ON again. This may clear the
message.
Advertisement
Table of Contents
