Printing A Job Saved In A Box (Stored Job Print) - Canon Color image RUNNER LBP5360 User Manual

Laser printer
Table of Contents

Advertisement

9
Select a number using [ ] and [
[
] and [ ].
Repeat this operation to enter the password.
1
1
NOTE
The password for an encrypted secured print is to be specified with 1 to 48
alphanumeric characters. Because only numbers can be entered from the control
panel, print an encrypted secured print job from the Remote UI if the password
contains any alphabetic characters.
10
After entering the specified password, press [OK].
1234
The specified file is printed. If you enter a wrong password, the entered password
disappears. In this case, re-enter the correct password.

Printing a Job Saved in a Box (Stored Job Print)

In a stored job print, a job is saved on the hard disk in the printer by specifying
[Store] from the computer, and the job is printed by the printer's control panel or
Remote UI. For details on using the Remote UI, see "Remote UI Guide".
This section describes the procedure for printing using the printer's control panel.
NOTE
The saved jobs remains in the hard disk even after being printed. When you want to
delete the saved jobs, use the Remote UI. (See Remote UI Guide)
Using the printer driver, you can change the name of the data to be saved when printing
the data. Enter the name with 24 or less alphanumeric characters.
1
Select [Store] in the printer driver on the computer, specify
the box in which you want to store the job, and then print.
NOTE
Up to the total of 100 jobs in all the boxes can be saved.
Printing/Saving Jobs (Only When the Hard Disk Is Installed)
], then move a digit using
3
3-11

Advertisement

Table of Contents
loading

Table of Contents