Table of Contents
Advertisement
Turning the Printer ON and Checking the Printer
Operation
This section describes the procedures for turning the printer ON and checking the
printer operation.
Turning the Printer ON
IMPORTANT
• Do not turn the printer ON immediately after turning it OFF. If you want to turn the printer
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF
before turning it ON again.
• If the printer does not operate properly or an error message appears, see "When the
Printer Does Not Operate Properly," on p. 2-38.
• Be sure to set the paper cassette in the printer before you turn the power ON for the first
time after you install the printer.
NOTE
When you turn the power ON for the first time after you install a hard disk or when a
problem has occurred to the hard disk, the printer is ready to print after approximately 60
seconds after it is turned ON because the hard disk is formatted after the printer is turned
ON.
1
Press " " of the power switch to turn the printer ON.
Turning the Printer ON and Checking the Printer Operation
2
2-33
Advertisement
Table of Contents
