Canon Color image RUNNER LBP5360 User Manual page 361

Square areas that cannot be seen on the display appear around lines or text and are printed
in a different color from the other areas.
Cause
Remedy 1 In the QUALITY MENU options in the SETUP menu, specify the settings for
Remedy 2 Set [Color Halftones], [B & W Halftones], or [Halftones] to any of [High
Remedy 3 Set [Matching Mode] to [Gamma Adjustment] in the printer driver.
8
Remedy 4 Set [Matching Mode] to [Printer Default] in the printer driver, then specify the
8-64 When You Cannot Obtain Appropriate Printout Results
A process that is different from the specified halftone process or color process
may be applied depending on the operating system or application.
GRAY COMPENSATE (See p. 6-39) so that the setting values for TEXT,
GRAPHICS, and IMAGE are all the same, and then set [Gray Compensation] to
[Printer Default] in the printer driver.
In order to specify the setting for [Gray Compensation], display the following
dialog box.
- For UFR II Printer Driver: Display the [Advanced Settings] dialog box by
clicking [Details] in the [Quality] sheet, then clicking [Advanced Settings] in the
[Detailed Settings] dialog box.
- For PCL Printer Driver: Display the [Detailed Settings] dialog box by clicking
[Details] in the [Quality] sheet.
Resolution], [Resolution], [Gradation], or [Color Tone] in the printer driver.
In order to specify the setting for [Color Halftones], [B & W Halftones], or
[Halftones], display the [Detailed Settings] dialog box by clicking [Details] in the
[Quality] sheet.
In order to specify the setting for [Matching Mode], display the [Matching] sheet
by selecting the [Manual Color Settings] check box in the [Quality] sheet, and
then clicking [Color Settings].
settings for MATCHING METHOD (See p. 6-42) in the QUALITY MENU options
in the SETUP menu so that the setting values for TEXT, GRAPHICS, and
IMAGE are all the same.
In order to specify the setting for [Matching Mode], display the [Matching] sheet
by selecting the [Manual Color Settings] check box in the [Quality] sheet, and
then clicking [Color Settings].