Table of Contents
Advertisement
Cause 2
The printer received secured print data when the hard disk cannot be used.
Remedy
Press [Online] to cancel printing, set HARD DISK (See p. 6-19) in the
CONTROL MENU options in the SETUP menu to ON, perform a hard reset,
and then print again.
Cause 3
The number of the jobs exceeded the amount of jobs the printer can save as
secured print jobs (You can save up to 64 secured print jobs in the hard disk.)
Remedy
Press [Online] to cancel printing, delete any unnecessary secured print jobs,
and then print again.
Cause 4
The amount of the job data exceeded the amount of job data that you can save
on the hard disk as secured print jobs (You can save the data in total of up to
4GB of secured print jobs, stored jobs, and paused jobs in the hard disk.
However, when SECURED TYPE in the CONTROL MENU options is set to
PDL, you can save only up to 1.88GB of data.
Remedy
Press [Online] to cancel printing, resume any paused jobs or delete
unnecessary secured print jobs, and then print again.
<53 STORE ERROR>
Cause 1
The data for which a stored job print is specified is sent from a printer driver that
is not for LBP5360.
Remedy
Press [Online] to cancel the job.
Cause 2
The data cannot be saved on the hard disk because there is not sufficient free
space in the hard disk.
Remedy
The printer is ready to print by pressing [Online], ignoring the print data.
Cause 3
The number of the jobs exceeded the number of jobs you can save on the hard
disk.
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data.
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
Cause 4
The amount of the print jobs exceeded the amount of jobs you can save on the
hard disk.
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data.
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
<Auto Error Skip>
Message List
8-41
8
Advertisement
Table of Contents
