■ STD FORMAT
-
Erases the contents of the hard disk.
STD FORMAT performs a standard format of the hard disk. Perform this operation
when the problem is not solved by executing QUICK FORMAT.
IMPORTANT
If the message <CANNOT EXECUTE> appears when STD FORMAT is executed,
•
the hard disk is not formatted.
When performing STD FORMAT, remove all the interface cables (the LAN cable,
•
USB cable, and printer cable) connected to this printer.
While STD FORMAT is being executed, <FORMATTING> is displayed in the
•
display. Wait for a moment until the format is completed.
NOTE
This item is displayed only when an optional hard disk is installed.
SP.PRINT MODE
■ COATED PAPER
OFF*, ON
Specify the setting for this item according to the type of the coated paper to be
used.
OFF: Specify when printing coated paper of 27.9 lb Bond to 44.4 lb Cover (105
•
to 120 g/m
ON: Specify when printing coated paper of 44.5 to 59.2 lb Cover (121 to 160 g/
•
2
m
).
■ CURL ADJUSTMENT
OFF*, ON
When printed paper curls (the printed side curls outward), specify whether the
curl should be straightened out.
OFF: The curl of the printed paper is not straightened out.
•
ON: The curl of the printed paper is straightened out. By doing so, you may
•
improve the printout results.
IMPORTANT
If continuous printing is performed with this item set to ON, the printing speed may
drop.
2
).
SETUP Menu Settings
6
6-55