Table of Contents
Advertisement
Cause 3
The amount of the print jobs exceeded the amount of jobs you can save in the
hard disk.
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data. The
data of 2GB or larger cannot be saved.
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
Problems with the Printout Results
Unreadable characters are printed.
Cause 1
The data is printed from Windows without the supplied printer driver installed for
Windows.
Remedy
Install the supplied printer driver for Windows, then print again. (See Driver
Guide)
Cause 2
The printer setting in the DOS application is not appropriate.
Remedy
Specify the printer setting in the DOS application to the one that is compatible
with this printer. (See Driver Guide)
A blank page cannot be printed.
Cause
PAPER SAVE is set to ON.
Remedy
When printing a blank page, set PAPER SAVE (See p. 6-56) and (See p. 6-61)
to OFF.
The last page cannot be printed.
Cause
The command that notifies of the end of the data is not sent from the computer
(the Job indicator is on).
Remedy
Press [Online] to place the printer offline, then select FORM FEED in the
RESET menu (If you print using an application that does not have a printing
function, the last page in which data is less than one page remains in the
memory). (See "Canceling a Job," on p. 3-14)
The data lies outside the paper.
Cause 1
You are using UFR II Printer Driver, and you loaded custom paper of its long
edges 8.50 in. (215.9 mm) or less in portrait orientation and printed when TRAY
PAPER SIZE or CASSETTE(n) SIZE (n = 1, 2) was set to MIXED SIZES.
Remedy
Load the paper in landscape orientation, then print again.
When You Cannot Obtain Appropriate Printout Results
8
8-53
Advertisement
Table of Contents
