Color Regis.adj; Density Control; Den.median Cont; Full Calibrate - Canon Color image RUNNER LBP5360 User Manual

6
PRNTPOSNPRINT
6-64 UTILITY Menu Settings

COLOR REGIS.ADJ

A phenomenon of "Out-of-Register Colors" is adjusted by controlling the shifts of
the print start positions of each color. Execute when the phenomenon of
"Out-of-Register Colors" occurs.
NOTE
It takes approximately 80 seconds to execute COLOR REGIS.ADJ.

DENSITY CONTROL

Controls the maximum print density and median print density. Execute when the
colors have changed and the data is not printed in the correct colors (specified
colors).
NOTE
It takes approximately 37 seconds to execute DENSITY CONTROL.

DEN.MEDIAN CONT

Controls the median print density. Execute when the colors of the median print
density have changed and the data is not printed in the correct colors (specified
colors).
NOTE
It takes approximately 37 seconds to execute DEN.MEDIAN CONT.

FULL CALIBRATE

Executes COLOR REGIS.ADJ and DENSITY CONTROL. Execute when you
want to adjust a phenomenon of "Out-of-Register Colors" and control the print
density (adjust color hues) at once.
NOTE
It takes approximately 133 seconds to execute FULL CALIBRATE.
-
The printing position adjusted in ADJ.START POS. (See p. 6-51) is printed. Check
the printout results to confirm the setting for ADJ.START POS.
NOTE
For adjusting the printing position, see "Adjusting the Printing Position," on p. 7-21.