Canon Color image RUNNER LBP5360 User Manual page 400

24
After completing the initialization, perform a hard reset or
cycle the power of the printer.
After starting the printer, the hard disk is formatted.
While the hard disk is being formatted, <FORMATTING> is displayed in the
display. Wait for a moment until the format is completed.
After the format of the hard disk is completed, connect all the interface cables.
IMPORTANT
The hard disk is formatted automatically after you install the hard disk, initialize the
SETUP menu, and start the printer. If the format is not performed at this point,
perform QUICK FORMAT (See p. 6-54) in HDD MAINTENANCE in the SETUP
menu.
NOTE
After installing the hard disk, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking [Get
Device Status] in the [Configuration]/[Device Settings] sheet.
If you cannot obtain the status of the optional accessories automatically, select the
[Hard Disk Installed] check box.
Installing a Hard Disk
9
9-35