Canon Color image RUNNER LBP5360 User Manual page 154

When you change the paper loaded in the multi-purpose tray frequently, it is convenient if
•
TRAY PAPER SIZE in the control panel is set to MIXED SIZES. If TRAY PAPER SIZE is
set to MIXED SIZES, you do not need to specify the setting for TRAY PAPER SIZE each
time you load different size paper. However, when specifying MIXED SIZES, make sure
that the size of the paper loaded in the multi-purpose tray matches the paper size
specified in the printer driver before printing. If they do not match, the printer may stop
printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may occur. Be
sure to check if the paper size specified in the printer driver matches the size of the paper
loaded in the multi-purpose tray before using the printer. However, if SPECIAL MODE J
(See p. 6-52) is set to ON, the printer prints without checking the paper size even when
the paper size specified in the printer driver and the size of the paper loaded in the
multi-purpose tray do not match.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size paper
of its long edges 8.50 in. (215.9 mm) or less when TRAY PAPER SIZE is set to MIXED
SIZES, load the paper in landscape orientation. When you are not printing from UFR II
Printer Driver, load the paper in portrait orientation.
NOTE
The names of the following paper sizes are indicated by an abbreviation.
Legal: LGL, Letter: LTR, Executive: EXEC, Statement: STMT, Foolscap: FLSC
1
Press [Settings].
SETUP
CONTROL MENU
2
Select FEEDER MENU using [
FEEDER MENU
TRAY PAPER SIZE→
3
Select TRAY PAPER SIZE using [
TRAY PAPER SIZE→
=LTR
→
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→
Printing from the Multi-purpose Tray
4
4-49