Table of Contents
Advertisement
• After removing the protective plate, be careful not to drop screws, paper clips,
staples, or other metal objects inside the expansion slot. If any of these objects
should drop inside the expansion slot, do not plug the power plug into the AC
power outlet and contact your local authorized Canon dealer.
9
Insert the connector cable supplied with the hard disk into the
socket (A) on the main board.
(A)
Insert the connector cable
with the red line at the bottom.
CAUTION
Be careful not to be injured by the edges of the main board parts or the
hard disk.
IMPORTANT
Do not try to insert the socket forcibly when it is misaligned or set at angle. The pins
may be damaged, and the hard disk may not operate properly.
Installing a Hard Disk
9
9-29
Advertisement
Table of Contents
