Power Saving (Power Save Mode)
You can reduce power consumption efficiently by using POWER SAVE MODE
when the printer is idle or not in use.
There are the following two kinds of Power Save Mode.
IMPORTANT
Even if the power switch is turned OFF, power is consumed only slightly while the power
3
plug is inserted into the AC power outlet. To cut the power consumption completely,
unplug the power plug from the AC power outlet.
NOTE
The Job indicator is on while a job is being stored into a box even if the printer is in Power
•
Save Mode (The printer can store jobs into the boxes only when a hard disk is installed in
the printer).
You can release Power Save Mode by setting TIMER SETTINGS to WAKE UP TIME
•
(See p. 6-18).
To configure the printer so that it does not enter Power Save Mode, set POWER SAVE
•
MODE (See p. 6-13) to OFF.
To configure the printer so that it does not enter Power Save Mode when an error is
•
occurring in the printer (when the Message indicator is on, or the number in the message
blinks), set PWR SAVE IN ERR (See p. 6-14) to OFF.
3-2
Power Saving (Power Save Mode)