Table of Contents
Advertisement
Specifying Settings via FTP Client
You can specify settings, such as the network settings of the machine, from an FTP client via TCP/IP network. Check the
IP address set to the machine in advance (
contact your network administrator.
1
Start [Command Prompt].
●
Open the [Start] menu and select [All Programs] or [Programs]
For Mac OS users
●
Start the Terminal.
For UNIX users
●
Display the console screen.
2
Enter "ftp <IP address of the machine>" and press the [ENTER] key.
●
Example: ftp 192.168.1.45
3
Enter "root" for the user name and press the [ENTER] key.
4
Enter the System Manager password and press the [ENTER] key.
●
The default password is "7654321".
➠
"230 User root logged in." is displayed.
5
Enter "cd config" and press the [ENTER] key.
6
Enter "get CONFIG <file name>" and press the [ENTER] key.
●
"CONFIG" must be all uppercase.
●
Any characters can be used in <file name> (example: get CONFIG Setting.txt).
➠
The setting file is downloaded to the directory that is displayed when Command Prompt is started. In an
example of a screen, the file is downloaded to the "USER_NAME" folder in [Users] on drive C:.
Appendix
Network Status Print(P. 586) ). If you are unsure of the IP address,
Setting the System Manager Password(P. 256)
653
[Accessories]
[Command Prompt].
0YSF-08C
Advertisement
Table of Contents
