Settings On Client Pc - Canon MG2500 series Online Manual

Settings on Client PC

After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
If you are using Windows 8, Windows 7, or Windows Vista
1. Install the MP Drivers
Note
You must manually select the connection destination on the client computer.
During installation, click Cancel in the Connect Cable window. When the
confirmation message appears, click Yes.
In the Installation Incomplete window, select the Select printer port check box,
click Manual Selection, and then select the appropriate port.
2. Start the wizard
• If you are using Windows 8, from the Desktop charms, select Settings -> Control
Panel -> Hardware and Sound -> Devices and Printers -> Add a printer.
• If you are using Windows 7, select the Start menu -> Devices and Printers ->
Add a printer.
• If you are using Windows Vista, select the Start menu -> Network -> Add
Printer.
The Add Printer window appears.
3. Add a printer
Select Add a network, wireless or Bluetooth printer, and click the icon for the
printer that you have configured on the print server system to be shared, and then
click Next.
Note
If the icon for the printer is not displayed, check that the printer is actually
connected to the print server.
It may take some time for the icon for the printer to appear.
4. Complete the setup
on the client systems
168