Fax Settings; Image Quality Settings; Density Settings; Sharpness Settings - Canon 3556B001AA Basic Operation Manual

Fax Settings

I mage Quality Settings
Fax mode screen
Specify destination.
2010 01/01 12:52AM
RX Mode: Auto
Resolution: 200 x 1...
D ensity Settings
Fax mode screen
Specify destination.
2010 01/01 12:52AM
RX Mode: Auto
Resolution: 200 x 1...
Sh arpness Settings
Fax mode screen
Specify destination.
2010 01/01 12:52AM
+ -
Density: 0
+ -
Sharpness: 0
Select <Sharpness> with [
Setting screen
Image
Resolution
Quality
200 x 100 dpi (Norma
200 x 200 dpi (Fine)
200 x 200 dpi (Phot...
200 x 400 dpi (Supe...
< 200 dpi x 100 dpi (Normal) >
< 200 dpi x 200 dpi (Fine) >
<200 dpi x 200 dpi (Photo) >
<200 dpi x 400 dpi (Superfi ne) >
<400 dpi x 400 dpi (Ultrafi ne) >
Setting screen
Density
Density
- v +
[ ] Makes the scanning density lighter.
[ ] Makes the scanning density darker.
Setting screen
Sharpness
- +
] or [ ], and then press [OK].
If you want to clearly scan halftone dots which of printed photos,
[ ] adjust the sharpness to <->. This can reduce the moire eff ect (patchy
patterns called "moire").
If you want to clearly scan text or lines, adjust the sharpness to <+>.
[ ] This is appropriate for scanning documents which are blueprints or
thinly penciled.
Specify the scanning resolution.
As you set a higher resolution you will get better resolution
but the transmission time will be longer.
For text documents
For fi ne text documents
For documents that contain photographs
For fi ne text documents
For fi ne text documents
Specify the scanning density.
You can emphasize the outline of the image in the
document or decrease the contrast.
6-3